Dump trailer GARARAT 2DT-6.5
                    
                        
                        غير متوفر
Dump trailer GARARAT 2DT-6.5 (with sides made of profiled sheet) Purpose - for transportation of various agricultural goods and materials - manure, sawdust, gravel, wood chips, compost, silage, grain, beets, as well as other bulk and piece goods, except for fragments of rocks and cobblestones on all types of roads and in the field.
| SPECIFICATION | |
|---|---|
| Type | Trailed | 
| Payload capacity, kg | 6500 | 
| Maximum speed, km / h, no more: | |
| - in transport mode | 30 | 
| - in technological mode | 18 | 
| Number of axles, pcs. | 2 | 
| Track width in the center of the wheels, mm | 1850 | 
| Wheelbase, mm | 2700 | 
| Discharge sides | 3 | 
| Ground clearance, mm | 310 | 
| Internal dimensions, mm: | |
| - length | 4050 | 
| - width | 2130 | 
| Body floor area, sq.m. | 8,63 | 
| Board height, mm: | |
| - basic (profiled sheet 2 mm) | 630 | 
| - overhead (profiled sheet 1.2 mm) | 300 or 630 | 
| - overhead mesh | 1000 | 
| Body volume, cbm: | |
| - with main boards | 5.43 | 
| - with extension boards | 8.00 or 10.87 | 
| - with extension mesh boards | 14.00 | 
| Body lifting angle, degrees | 50 | 
| Trailer weight, kg * | 1650 | 
| Overall dimensions of the trailer, mm: | |
| - length | 5900 | 
| - width | 2310 | 
| - height * | 1910 | 
| Loading height, mm: | |
| - on the floor of the body | 1280 | 
| - on the main boards | 1910 | 
| - on the extension boards | 2210 or 2540 | 
| - on the extension mesh boards | 2910 | 
| Service brake system | pneumatic, drum | 
| Number of brake axles | 2 | 
| Parking brake system | mechanical with manual drive | 
| Compatebility | tractors 60-100 h.p. | 
| Features | |
| Lifting mechanism | telescopic three-rod hydraulic cylinder (lifting capacity up to 12 t.) | 
| The frame of the trailer is made of a channel | - 180 mm | 
| The trailer subframe is made of channel | - 160 mm | 
| The axles are made of 60 mm square | - each withstands a load of 4 tons at a speed of 40 km/h | 
| Swing circle | - Z-shaped profile, diameter - 110 mm, withstands loads up to 10 tons. | 
    تمت الإضافة إلى سلة التسوق بنجاح